Product Description
1. Fine Jewelry set inlaid with 5A cubic zirconia.
2. Very luxurious, covered with zircon, double plated.
3. This set is very suitable for souvenirs, lovers' gifts, birthday gifts, etc.
4. Accept ODM, stones can be replaced.
5. Short customization time, customize according to the pattern your customer likes.
Features
Material: 925 silver + cubic zirconia.
Color: Rhodium, Gold and Rose gold plating are workable.
Ring
Size: US6,7,8
Weight:4.8g
Earrings
Weight:5/2.6g
MOQ: 30sets/color
Sales Mode: Wholesale
Leaye jewelry was founded in 2009 and located in Panyu, Guangzhou. We mainly engaged in design, production and sales service of fashion bracelets. There are three production lines in K-gold, 925 Silver and Brass jewelries. And annual output up to one million pieces, service for more than 80 countries and regions around the world.
Hi, If it is your first time to buy and customize jewelry from us , please read the following text carefully, especially the red parts. Basically most of your questions will be answered here. If you still don't understand and have other questions after reading the entire text, please don’t hesitate to send inquiry to us.
1. Does your custom-made jewelry meet the international 925 silver content standard?
Yes. We guarantee that the silver content must be more than 92.5%, fully meeting international standards. If the test content is insufficient, we will accept the return and refund.
2. Can you customize semi-finished products?
Yes. Our ODM is completely customized according to your requirements; we can do whatever steps you say. But our professional advice is to ship the finished product directly. This is because due to the different process equipment of various manufacturers, there are certain risks in the secondary processing of semi-finished products, and it is difficult to define whether the problem is the responsibility. Of course, to avoid quality dispute, it is recommended that you must do the acceptance at each stage, ensure that you know the status of each step if you do want semi-finished products only.
3. Can you customize products according to the gemstones we provide?
Yes. The stone supply from customers is supported. You can provide the actual stone when placing an order, which is convenient to develop the mold and arrange the appropriate production process according to the properties of the actual stone. Do not just provide the stone surface specifications, because the stone craftsmanship of each manufacturer is different, although the surface specifications are the same, but the interior is very different. Reminder: please provide an appropriate amount of spare stones for replacement in case stone lost or damaged.
4. I want to customize my own style products, but lack inspiration; do you have a design draft reference here?
Yes. We have many styles and various elements. You can contact us for reference; maybe you can get inspiration from it.
5. I like some hot-selling model, but it needs to be modified. Can you do it?
Yes. You can provide pictures of popular models and modify ideas, and our designers will quickly make sketches. To reiterate, we resolutely safeguard the intellectual property rights of designers, and do not make pirated and counterfeit products.
6. Why MOQ need to be 30 pcs?
This is determined by the production efficiency. Every time we replace products for production, we need to replace the corresponding materials and tools. Therefore, if the quantity of each product in a single batch is too small, then we need to change materials and tools frequently, which will reduce production efficiency.
7. How long does your plating last?
First, there are mainly two types of jewelry fading. One is that the electroplating layer on the surface is worn away, revealing the base color, which looks like discoloration. This is the fading in physical nature. The other is the oxidation of the surface electroplating layer. , which is a fading in chemical nature.
For physical fading, we can increase plating thickness. And try to avoid collision and friction when wearing.
For chemical fading, we can improve plating process, especially the protection process. And try to avoid exposing to chemicals for long time. Be careful to cleaning and sealing.
Different plating color last different time. Rhodium plating usually is very stable and will not oxidize and discolor under normal circumstances.
For 18k yellow gold plating (75% gold, 25% copper, silver, zinc, etc.) and rose gold plating (75% gold, 22.5% copper, 2.75% silver etc.), because copper and silver element are relatively active, it is easy to oxidize and turn black, according to the copper content , rose gold is more easily oxidized and blackened than K gold. Generally color can keep 6 months for K gold and 3 months for rose gold. But we can also increase plating lasting time by above ways mentioned.
8. What is a special point in our electroplating protection process?
To increase lasting time of k gold and rose gold electroplating, we recommend adding E-coating after electroplating. E-coating can effectively isolate the reaction between copper/silver and oxygen, to maintain the color for a long time. Our E-coating is colorless and odorless. It is covered on the surface of jewelry by electroplating process, and then baked at high temperature to form an extremely thin layer of glue paint. The E-coating process is very mature and widely used in the field of electroplating protection.
9. What are the advantages and disadvantages of thick gold plating and ordinary plating?
Thick gold plating is to make the plating layer on the surface thicker, to achieve the purpose of wear resistance. For example, when a person rubs on the ground, a person with 1 clothe can easily wear out and reveal their body. And people who wear more clothes more easily protect their body to be exposed. In this sense, thick gold plating increases the wear resistance compared with ordinary electroplating, and accordingly the electroplating fee cost several time.
10. Besides jewelry, can you also make souvenirs?
Yes. Various armbands, badges, medals, etc.; rings with organization logos, team logos, college logos, etc.; necklaces with company logos, bracelet tags, etc.; commemorative gold and silver coins, square coins, etc.; we can customize according to your draft and request.
11. How to confirm color of stones?
Due to the different color rendering of the computer or mobile phone display, the color seen through the picture is different from the real object. In addition to regular gemstone colors, other colors are best confirmed by stone color charts or samples. Therefore, for the first large batch of colored stones, you can send samples, and then do mass production after confirmation. In addition, there are certain color differences in different stone batches; those are normal phenomenon and not a quality problem.
You could follow the instruction below to start bussiness with our company, Thank you in advance.
Click here to start.